Shift Summary 2/6/2000 Day:

 Beam at start: 18.20 mA;  Beam at end: 15.91 mA;   
 Typical Lumin. 1.2 x 10^31 cm^-2 s^-1
 Data type: chi1,first point (Ecm = 3511.7 Mev)    
 Run 5120 (183 nb-1);
 Shifters: SP, PR, KEG (4hrs)      Log Book 6 Pages 235-239

 Summary:

 Gas Check Done..no bottles changed..

 Beam quite nice and stable all shift.. 

 10:10 am: after deceleration and cooling of the beam, beam current is
           18.33 mA and Ecm is 3511.65 Mev;
           pedestal run 5118 is written to database

 10:25 am: STRAW 2 current overload (more than 100 microA), turned off for
           a while   
 10:27 am: data taking starts -> run 5119
 10:45   : found CCAL shaper boards off, run 5119 aborted 
 10:52   : run 5120 starts (Ibeam = 18.02 mA)

   monitor plots look as usual..missing 4 ccal blocks, missing 2 FVC's
   missing 2 H2p's in ADC plot and 1 in TDC plot.

 12:30 pm: STRAW 2 turned on with HV = 1500 V (I = 66 microA)
 12:35   : DAQ hang -> reset issued
 15:15   : STRAW 2 current has decreased to 55 microA -> HV moved to 1530V
           (usual value) and currents goes to 66 microA.
 15:40   : stopped run 5120 (Ibeam = 15.91 mA), deceleration begins

                                     Stephen & Paolo & Keith